Solid Wire Electrode BA-S2CrMo1 for Submerged Arc Welding
EN ISO 24598-A (EN 12070): S S CrMo1
SFA 5.23 / AWS A5.23: EB2(R)
CrMo-alloyed low impurity wire electrode for submerged arc welding of quenched and tempered steels and heat-resistant steels in boiler and pressure vessel construction as well as pipe manufacture.
Typical analysis and chemical composition acc. to EN ISO 24598-A and AWS A5.23
|Typical analysis BA-S2CrMo1||0,10||0,17||0,98||0,52||0,03||1,20||0,008||0,009||Cu total
|S S CrMo1 acc. to ISO 24598-A||0,08 - 0,15||0,05 - 0,25||0,60 - 1,00||0,40 - 0,65||0,3||0,90 - 1,30||0,020||0,020||V 0,03
|EB2 acc. to AWS A5.23||0,07 - 0,15||0,05 - 0,30||0,40 - 1,00||0,45 - 0,65||-||1,00 - 1,75||0,025||0,025||Cu 0,35|
|EB2R: As / Sn / Sb 0.005||-||-||-||-||-||-||0,010||0,010||Cu 0,15|
Quenched and tempered steels acc. to EN 10025, EN 10028 and ASTM: such as 25CrMo4 / AISI 4130
suitable fluxes BF 8.1 and BF 10
Heat-resistant steels acc. to EN 10028 and ASTM: 13CrMo4-5 / A182-F12 / A213 Gr. T12 / A387 Gr. 12
suitable fluxes BF 1, BF 5.1, BF 6.5, BF 8.1 and BF 10
Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.
2.0 – 5.0 mm; Sizes and tolerances acc. to ISO 544 and AWS A5.23.
Wire Electrode Surface
Copper-coated, smooth finish free from surface defects and foreign matter.