Wire

Solid Wire Electrode BA-S3Mo for Submerged Arc Welding

Classification:
EN ISO 14171-A (EN 756): S3Mo
SFA 5.23 / AWS A5.23: EA4

Main Application

Mo-alloyed wire electrode with higher Mn-content for submerged arc welding of fine grain steels, pipe steels and heat-resistant boiler and vessel steels.

Typical analysis and chemical composition acc. to EN ISO 14171-A and AWS A5.23

Wire electrodeCSiMnMoNiCrPSCu total
Typical analysis BA-S3Mo 0.10 0.13 1.55 0.49 0.02 0.05 0.014 0.011 0.08
S3Mo acc. to ISO 14171-A 0.07 - 0.15 0.05 - 0.25 1.30 - 1.75 0.45 - 0.65 0.15 0.15 0.025 0.025 0.30
EA4 acc. to AWS A5.23 0.05 - 0.15 0.20 1.20 - 1.70 0.45 - 0.65 - - 0.025 0.025 0.35

Base Materials

Fine grain steels acc. to EN 10025, EN 10028 and ASTM: P460N / S460NL / to P500Q / S500QL
suitable fluxes BF 5.1, BF 6.5 and BF 10

Pipe steels acc. to ISO 3183, EN 10208 and API-5: L360N / X52 to L555Q / X80
suitable fluxes BF 5.1, BF 6.30 and BF 6.5

Heat-resistant steels acc. to EN 10028 and ASTM: 16 Mo 3 / A204 Gr. A and A209 Gr. T1, P355GH / A516 Gr. 70 and S355J2G3 / A572 Gr. 50
suitable fluxes BF 5.1, BF 6.5 and BF 10

Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.

Package Forms

Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.

Diameter

2.0 – 5.0 mm; Sizes and tolerances acc. to ISO 544 and AWS A5.23.

Wire Electrode Surface

Copper-coated, smooth finish free from surface defects and foreign matter.

 

Go back