Solid Wire Electrode BA-S3NiMo1/4 for Submerged Arc Welding
EN ISO 14171-A: S3Ni1Mo0,2
SFA 5.23 / AWS A5.23: ENi5
NiMo-alloyed wire electrode with higher Mn-content for submerged arc welding of high tensile pipe steels and high tensile fine grain steels in vessel and apparatus construction as well as Off-Shore applications. Especially suitable for low temperature applications because of low Mo-content. Best suitable if requirements for sour-gas environment are to match Ni < 1,0%.
Typical analysis and chemical composition acc. to EN ISO 14171-A and AWS A5.23
|Wire electrode||C||Si||Mn||Mo||Ni||Cr||P||S||Cu total|
|Typical analysis BA-S3NiMo1/4||0.12||0.15||1.58||0.23||0.95||0.04||0.005||0.002||0.08|
|S3Ni1Mo0,2 acc. to ISO 14171-A||0.07 - 0.15||0.10 - 0.35||1.20 - 1.60||0.15 - 0.30||0.80 - 1.20||0.15||0.015||0.015||0.30|
|ENi5 acc. to AWS A5.23||0.12||0.05 - 0.30||1.20 - 1.60||0.10 - 0.30||0.75 - 1.25||-||0.020||0.020||0.35|
Pipe steels acc. to ISO 3183, EN 10208 and API-5: L450Q / X65 to L555Q / X80
suitable fluxes BF 6.30 and BF 6.5
Fine grain steels acc. to EN 10025, EN 10028: P420ML / S420NL to S550QL quenched and tempered steels N-A-XTRA 70, 20MnMoNi5
suitable fluxes BF 5.1, BF 6.5 and BF 10
Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.
2.0 – 5.0 mm; Sizes and tolerances acc. to ISO 544 and AWS A5.23.
Wire Electrode Surface
Copper-coated, smooth finish free from surface defects and foreign matter.