Solid Wire Electrode BA-S4Mo for Submerged Arc Welding
EN ISO 14171-A (EN 756): S4Mo
SFA 5.23 / AWS A5.23: EA3
Mo-alloyed wire electrode with high Mn-content for submerged arc welding in the two-run technique of fine grain steels, pipe steels and heat-resistant boiler and vessel steels.
Typical analysis and chemical composition acc. to EN ISO 14171-A and AWS A5.23
|Wire electrode||C||Si||Mn||Mo||Ni||Cr||P||S||Cu total|
|Typical analysis BA-S4Mo||0.12||0.11||1.90||0.50||0.05||0.06||0.016||0.013||0.09|
|S4Mo acc. to ISO 14171-A||0.07 - 0.15||0.05 - 0.25||1.75 - 2.25||0.45 - 0.65||0.15||0.15||0.025||0.025||0.30|
|EA3 acc. to AWS A5.23||0.05 - 0.17||0.20||1.65 - 2.20||0.45 - 0.65||-||-||0.025||0.025||0.35|
Fine grain steels acc. to EN 10025, EN 10028 and ASTM: P460N / S460NL / to P500Q / S500QL
suitable fluxes BF 5.1 and BF 6.5
Pipe steels acc. to ISO 3183, EN 10208 and API-5: L485Q / X70 to L555Q / X80
suitable fluxes BF 6.30 and BF 6.5
Heat-resistant steels acc. to EN 10028 and ASTM: 16 Mo 3 / A204 Gr. A and A209 Gr. T1
suitable flux BF 10
Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.
2.0 – 5.0 mm; Sizes and tolerances acc. to ISO 544 and AWS A5.23.
Wire Electrode Surface
Copper-coated, smooth finish free from surface defects and foreign matter.