Solid Wire Electrode BA-WIRE 316L for Submerged Arc Welding
EN ISO 14343-A: S 19 12 3 L
SFA 5.9 / AWS A5.9: ER316L
BA-WIRE 316L is a submerged arc welding wire intended for welding austenitic stainless steels 1.4435 / 316L.
Suitable for service temperature from -120 ° to +400 °C.
Typical analysis and chemical composition acc. to EN ISO 14343-A and AWS A5.9
|Wire electrode||C||Si||Mn||Mo||Ni||Cr||P||S||Cu total|
|Typical analysis BA-WIRE 316L||0.015||0.4||1.7||2.7||12.0||19.0||0.020||0.013||0.15|
|S 19 12 3 L acc. to ISO 14343-A||0.03||0.65||1.0 - 2.5||2.5 - 3.0||11.0 - 14.0||18.0 - 20.0||0.03||0.02||0.5|
|ER316L acc. to AWS A5.9||0.03||0.30 - 0.65||1.0 - 2.5||2.0 - 3.0||11.0 - 14.0||18.0 - 20.0||0.03||0.03||0.75|
Also available BA-WIRE 316LF with low ferrite content.
1.4401/ X5CrNiMo17-12-2, 1.4404/ X2CrNiMo17-12-2, 1.4435/ X2CrNiMo18-14-3, 1.4436/ X3CrNiMo17-13-3, 1.4571/ X6CrNiMoTi17-12-2, 1.4580/ X6CrNiMoNb17-12-2, 1.4583/ X10CrNiMoNb18-12, 1.4409/ GX2CrNiMo 19-11-2
UNS S31653; AISI 316L, 316Ti, 316Cb
Suitable fluxes: BF 38, WP 380
Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.
1.6 – 4.0 mm; sizes and tolerances acc. to ISO 544 and AWS A5.9.
Wire Electrode Surface
Smooth finish free from surface defects and foreign matter.